Page 120 - Demo

118 CPI %u2013 Concrete Plant International %u2013 5 | 2025 www.cpi-worldwide.comCONCRETE PRODUCTS & CAST STONEPrecision through height measurement and density calculationFrima AQC enables highly precise measurement of product parameters:%u2022 Height measurementWith the previously mentioned accuracy of 0.5 mm, even the smallest deviations in product height can be detected. This allows production to be optimized to the lowest permissible height, which in turn reduces raw material costs.%u2022 Density calculationBy precisely measuring product geometry, the volume of each product can be calculated. This enables accurate determination of density, which is crucial for product quality.Error detection and reportingThe system detects a wide range of surface defects such as discolorations, cracks, depressions, and inclusions.As soon as a defect is identified, the system sends a signal to both the operator interface and the production control unit to stop the transport system, thereby preventing the production of defective products.Integration of RFID technologyAnother key element of the new production line is the Radio-Frequency Identification (RFID) tracking system. With the help of RFID read/write devices, production documents are equipped with RFID chips containing all relevant production data. The data can be read accurately and securely, enabling full traceability of each product. The system thus ensures seamless documentation and improves data integrity across the entire production line.Web-based user interfaceThe system%u2019s user interface is web-based, offering simple and user-friendly operation. It is accessible on various devices, including computers, tablets, and smartphones. Through the interface, operators can not only detect errors in real time but also view detailed production statistics and monitor the status of the current batch.A new level of automation and quality assuranceWith the introduction of the Frima AQC system and RFID technology in collaboration with Quatromatic, Frima aims to elevate paving block and paving slab production to a new level of efficiency and quality assurance. Through precise measurements, real-time defect detection, and the ability to immediately control production, the system can not only reduce costs but also significantly enhance product quality. These systems represent an innovative solution with higher automation levels and improved production standards. nFURTHER INFORMATIONFRIMA GmbH & Co. KG Stedinger Stra%u00dfe 12 26723 Emden, Germany T +49 4921 5840 info@frima-emden.de www.frima-emden.deDetection of defective products on the dry side.The introduction of the Frima AQC system and RFID technology was carried out in collaboration with Quatromatic. From left to right: Ingo de Vries and Frank Mansholt (Frima), Nikita Shumeyko (Quatromatic), Onno Fritzen (Frima).