Page 181 - Demo

PRECAST CONCRETE ELEMENTSwww.cpi-worldwide.com CPI %u2013 Concrete Plant International %u2013 2 | 2026 181A key advantage lies in compact design: the modular structure allows the modular table to be easily transported from one project to the next and saves storage space during idle periods. The individual segments can be transported on standardized carriers and are suitable for both truck and container transport. For handling on site, each table is equipped with four lifting points, which are connected via shackles to detachable end ribs.If required, the equipment can also be permanently installed in a precast plant at a later stage.Easy alignment and installationFor precise alignment of the table segments, levelling plates with thicknesses of 0.5 mm, 1 mm and 2 mm are used. These serve as a basis for fine adjustment. In addition, the table legs are equipped with adjustment screws that allow height differences in the subsoil to be compensated. Larger uneven areas or depressions in the ground must be levelled in advance using suitable filling material to ensure a flat and stable installation surface. Pre-drilled holes on all sides allow expansion in all directionsMesh Bending Device MBDintegrated in the ERM-ECO Welding Line for the fully automatic production of 3D reinforcing elements in smallest lot sizes%u2022 Extended ERM-ECO functionality with integrated sheet bending feature%u2022 Zero changeover times between individual mesh types and / or bent reinforcing elements / cages for just-in-time production%u2022 Automatic bending mandrel change%u2022 Easy-to-use software WIRE CAD and WIRE FLOW9.-21. April 2026,Graz-RaabaVideo13.-17. April 2026Hall 17 Booth B24RegistrationEVG Entwicklungs- und Verwertungs- Gesellschaft m.b.H. | Gustinus- Ambrosi- Strasse 1-3, 8074 Raaba | www.evg.com