Page 115 - Demo

PRECAST CONCRETE ELEMENTSwww.cpi-worldwide.com CPI %u2013 Concrete Plant International %u2013 6 | 2025threads. The combination of tension and pressure screws allows the tilt and position to be adjusted precisely.The balcony-side installation part consists of a keyhole receptacle for the tension screw and rests on the height adjustment screws of the console to introduce shear forces. The installation part is anchored in concrete at the rear.Results of the final research designLoad-bearingThe load at the ultimate limit state could be applied to the system without visible damage. At the serviceability limit state, the system deformed by 17.01 mm, as shown in Figure 7a. Of this, 4.68 mm resulted from the support rotation and 4.76 mm from the dead load. The live load component was therefore 7.57 mm.Fig. 6: Final draft of the research stage (a) %u2013 Final draft in the testing application (b)b)a)SOMMER Anlagentechnik GmbHBenzstrasse 1 | D-84051 Altheim/GermanyTel: +49 (0) 87 03 / 98 91-0 | Fax: +49 (0) 87 03 / 98 91-25info@sommer-precast.de | www.sommer-precast.de| Stationary line production| Tilting tables| Pallet circulation plants| Transport and handling systems| Multi-Function-Shuttering-Robot (MFSR)| Concrete distribution systems for all purposes| Compacting systems| Finishing equipment| Shuttering systems| Shuttering for special purpose elements| Moulds for garages/moulds for rooms/special purpose elements| Shuttering for skeleton building systems| Moulds for columns/moulds for girders/moulds for TT-elements| Insulation-Process-Application-Robot (IPAR)| Shuttle-Processing-Plant (SPP)Production Engineering and Automation Systems for the Prefabricated Concrete Element Industry